What are the maintenance methods of PPR ball valve?

PPR ball valve maintenance methods mainly include the following points:

Check the sealing performance of PPR ball valve regularly

The sealing performance of ball valve is the key to ensure its normal operation. It is necessary to regularly check whether the seal of the ball valve is intact. And replace it in time if it is damaged or worn. In addition, attention should also be paid to checking whether the matching gap between the sphere and the through hole is appropriate. If too large or too small will lead to leakage phenomenon.

Clean the impurities and dirt inside the ball valve regularly

Ball valve in the process of use will produce impurities and dirt. If not cleaned in time will affect the normal work of the valve. It is recommended to regularly clean the impurities and dirt inside the ball valve to keep the valve clean and sanitary. When cleaning, care should be taken not to use hard objects to scratch the surface of the ball, so as not to scratch the seal.

Lubricate the moving parts of the valve regularly

Ball valves have many moving parts, such as bearings, gears, etc., which need regular lubrication to ensure their flexibility and reliability. It is recommended to regularly add an appropriate amount of lubricating oil or grease to the moving parts of the valve. Pay attention to the selection and replacement cycle of lubricating oil or grease.

Avoid excessive radial force

The structural characteristics of the ball valve determine that it cannot withstand too much radial force. During installation and use, excessive radial force should be avoided to prevent deformation or damage to the sphere. If the ball valve needs to be used in a large radial force environment. It needs to be specially designed and manufactured, which increases the cost and difficulty.

Follow the correct operation method

Correct operation of the ball valve is the key to ensure its normal operation and extend its service life. When operating the ball valve, the appropriate operation mode and flow adjustment method should be selected according to the actual needs, and pay attention to the opening and closing direction of the valve. At the same time, Vitech the correct maintenance methods and cycles should also be followed to ensure the performance and service life of the valve.

If you have read this article and have any questions, please feel free to contact IFAN. Below is our contact information:

Whatsapp:+86 13373827623
Email：[email protected]