1.Pipe material. CPVC is mainly used to produce plates, rods and pipes for conveying hot water and corrosive media. It can still maintain sufficient strength at a temperature not exceeding 100°C. It can be used for a long time under the condition of high internal pressure. The weight of CPVC is 1/6 of brass, 1/5 of steel, and has extremely low thermal conductivity. Therefore, pipes made of CPVC are light in weight, have good thermal insulation properties, and do not require insulation.
2.CPVC pipes can be used as hot sewage pipes in factories, electroplating solution pipes, thermochemical reagent delivery pipes, wet chlorine gas delivery pipes in chlor-alkali plants, etc.
3.Injection molded parts. CPVC resin can be used to produce water supply pipes, filter materials, dehydrators and other pipe fittings. Such as trunking, protective layer of conductors, electrical switches, protective sleeves of fuses, insulating materials of cables, etc.
4.Rolled plate. It can be used to manufacture chemical equipment resistant to chemical corrosion. Such as reactors, valves, electrolyzers, etc.
5.Composite materials. CPVC composite material composed of CPVC and some inorganic or organic fibers. Its impact resistance and heat resistance are superior to other resin composites. It can be made into plates, pipes, corrugated plates, profiles, etc.
6.CPVC can be used to modify polyvinyl chloride fibers. The washing and drying temperature of domestic polyvinyl chloride fiber should not exceed 60 ℃. Add 30% CPVC when spinning PVC. Can greatly improve the heat resistance of products. The shrinkage rate dropped from 50% to less than 10%.
More advantages:
7.Foaming material. The heat resistance of CPVC foam material is better than that of PVC foam material. The high-temperature shrinkage rate is quite small, and it can be used as an insulation material for hot water pipes and pipes. CPVC with a chlorine content above 60% has very good retention of solvents. CPVC can be foamed in solvents that generate gas when heated. A uniform microporous foaming gas is obtained. Solvents such as hydrocarbons, ethers, and aldehydes with a boiling point of 50-160°C are used as blowing agents.
8.Others. Blend CPVC with thermoplastics or thermosets. The physical and mechanical properties of these materials can be significantly improved. Such as improving the heat resistance of products.
9.Foreign countries have also prepared CPVC with higher impact resistance and better transparency through the improvement of production technology. This transparent material can be used in automobiles, CDs, and audio-visual products, and has good economic benefits.
IFAN has 30+ years of experience in the plumbing industry. If you are looking for suppliers of pvc pipe fittings, please visit our website: , you will get the price and other detailed information about pvc pipe fittings. Welcome to contact IFAN, this is our Whatsapp: https://api.whatsapp.com/send/?phone=8613373827623&text&type=phone_number&app_absent=0
