CPVC (Chlorinated Polyvinyl Chloride) fittings are a common piping material, often used in hot water pipes and chemical piping systems. ASTM 2826 is a standard specification for CPVC pipe fittings that provides design, material, processing and performance requirements for pipe fittings. In order to ensure the safety and reliability of CPVC piping system, the following are the professional installation steps of CPVC pipe fittings:
Installation Steps:
1.Determine the pipeline layout.
Before laying out the pipeline, be sure to consider the specification, material and environment of the pipeline. Determine the location and orientation of each plumbing fitting. Make sure the pipes are installed in the correct order and sequenced to run smoothly.
2.Cut the pipe. Use special tools to cut pipe or fittings. Make sure the cut is flat and free of cracks or damage.
3.Prepare the pipe joints. Sand around the joint with a coarse abrasive cloth. Ensure that the surface of the pipe joint is flat and clean for sand butt joint. After encountering the connection port, it should be handled in strict accordance with the size and interface clearance requirements of the specification.
4.Welding pipes. Put the prepared pipes and fittings into the corresponding parts. Connect with professional soldering tools. Then pipes and fittings cannot be welded incompletely. The surface must be free from foam, pores and pits.
5.Check the connection. After the pipes are connected, use a flying shear tool to measure the pipe wall thickness. Find problems in time and fix them in time.
6.Cleaning system. After the piping is installed, use professional tools to clean the system to remove dirt and residue from the inside of the piping. Ensure the cleanliness and safety of the piping system.
7.Exhaust. After the pipeline installation is completed, the air or other substances in the pipeline must be discharged to ensure the stable operation of the pipeline.
8.Install the bracket. Install brackets on pipes to support pipes and fittings. The installation position of the bracket should meet the specification requirements. The bracket must be installed firmly and be able to bear the weight of the pipe and fittings.
9.Install valves and accessories. Install corresponding valves, accessories, electrical equipment, etc. on the pipeline. Strictly follow the standard operation during installation to ensure correct installation.
10.Trial run. After all pipelines and fittings are installed, conduct a trial run. Check that the piping system is working properly and record the test results. If the test results are not satisfactory, the problem should be found and dealt with in time.
Contact Us
IFAN has 30+ years of experience in the plumbing industry. If you are looking for suppliers of pvc pipe fittings, please visit our website: , you will get the price and other detailed information about pvc pipe fittings. Welcome to contact IFAN, this is our Whatsapp: https://api.whatsapp.com/send/?phone=8613373827623&text&type=phone_number&app_absent=0
