Copper ball valves

Introduction

Copper ball valves is a common valve, mainly composed of ball, seat, stem, handle, flange and so on. The sphere is a spherical structure with a perforation in the middle, and the diameter is the same as the diameter of the pipe. When the handle is rotated, the stem rotates the sphere by transmitting force, thus achieving on-off control.

The maintenance and maintenance of the ball valve need to pay attention to the following points:

Keep valves clean

Regularly remove the dirt and dust on the valve. Especially the sealing part, and check and clean regularly to ensure that the sealing surface is clean.

Check sealing performance

Check the sealing performance of the copper ball valve regularly to ensure that there is no leakage when the valve is closed. If leakage is found, it should be dealt with in time.

Periodic lubrication

For the copper ball valve that needs to be lubricated, regularly fill lubricating oil or grease to ensure that its rotation is flexible.

Periodic inspection

Check the copper ball valve regularly. Including whether the opening and closing of the valve is smooth, and whether the packing is tight.

Corrosion protection

For exposed copper ball valves, anti-corrosion protection should be carried out, such as coating anti-rust paint.

Avoid long-term storage

If the copper ball valve is not used for a long time. It should be stored in a dry and well-ventilated place to avoid moisture and corrosion.

Replace wearing parts

For the wearing parts of the copper ball valve, such as the sealing ring. it should be replaced regularly to ensure its normal operation.

Maintenance personnel must have the required skills and knowledge

The maintenance and maintenance of copper ball valves requires certain skills and knowledge, and should be carried out by professionals or under their guidance.

Follow operating procedures

When operating the copper ball valve, the operating procedures should be followed to avoid valve damage due to improper operation.

The above information is for reference only, if necessary. It is recommended to consult the supplier or relevant technical personnel of the copper ball valve to obtain more accurate guidance.