Water Control Brass Valve

Introduction

Brass ball valves is a common valve, mainly composed of ball, seat, stem, handle, flange and so on. The sphere is a spherical structure with a perforation in the middle, and the diameter is the same as the diameter of the pipe. When the handle is rotated, the stem rotates the sphere by transmitting force, thus achieving on-off control.

Brass ball valve use precautions mainly include the following points:

Installation position

The ball valve should be installed according to the requirements of the pipeline system to choose the appropriate location. The installation position should be convenient for operation and maintenance. At the same time, the installation direction of the ball valve should also be correct, and there is usually an arrow on the valve body to indicate the flow direction of the medium. When installing, it should be consistent with the flow direction to avoid the valve failing to close normally when countercurrent.

Controls

When operating the ball valve, it should be handled gently to avoid excessive force causing valve damage. At the same time, follow the correct operating procedures. Open or close the handle first, and then slowly turn the spool to fully open or close the ball valve. During the operation, pay attention to the sealing of the valve and whether there is abnormal sound.

Maintenance

Check and maintain the ball valve regularly. Including checking the sealing performance of the valve, whether the packing is loose, and whether the valve stem is corroded. If the valve is found to have leakage, loose packing or corrosion of the valve stem, it should be repaired or replaced in time.

Use environment

The use of the ball valve environment should be dry, well ventilated, to avoid humidity, high temperature and corrosive environment. At the same time, during the use of the valve to avoid excessive pressure or impact. So as not to affect its normal operation and service life.

Upkeep

Ball valve maintenance methods include cleaning, lubrication and rust prevention. In the process of use, the impurities and dirt inside the valve should be cleaned regularly to keep the valve clean and sanitary. At the same time, it is necessary to regularly lubricate the moving parts of the valve to prevent rust and sticking. In long-term storage, it is necessary to keep dry and well ventilated to avoid moisture and corrosion of the valve.

In summary, the use of Brass ball valve precautions include installation location, operation, maintenance, use environment and maintenance. Follow the correct operation steps and precautions during use. Regular inspection and maintenance to ensure the normal operation and service life of the ball valve.