Understanding Your Connection
Brass angle valves have different ends. The two main types are compression and threaded. Choosing the correct type is essential. This guide explains both.
What is a Compression Valve?
This valve uses a separate nut and ferrule. The ferrule compresses onto the pipe. It creates a very strong seal. It works on smooth copper or plastic pipes. No special pipe threading is needed.
Installing a Compression Valve
Slide the nut onto the pipe first. Then slide the brass ferrule on. Insert the valve into the pipe. Hand-tighten the compression nut. Use two wrenches for the final tightening.
What is a Threaded Valve?
A threaded valve has female IPS threads. It screws onto a male-threaded pipe. This is common in older plumbing systems. You must use PTFE tape for sealing.
Installing a Threaded Valve
Apply PTFE tape to the male pipe threads. Wrap the tape clockwise. Screw the valve on by hand. Then use a wrench to secure it. Ensure it is snug and straight.
Which Type Do You Need?
Examine your existing water pipe. Is it smooth and without threads? You need a compression valve. Does it have screw-like threads? You need a threaded valve. Always confirm before buying.
Key Advantages of Each
Compression valves are very versatile. They are easier to remove later. Threaded connections are very robust. They are a more permanent solution. Both are reliable when installed correctly.
A Note on Quality
Regardless of the connection type, choose solid brass. Feel the weight of the valve. Ensure the handle turns smoothly. A ceramic disc cartridge is best. Quality ensures long-term performance.
If you have read this article and have any questions, please feel free to contact IFAN. Below is our contact information:
Whatsapp:+86 13373827623
Email：[email protected]
